Bluetooth android connection problems

[SeamusOD]

I have a HB02 blue tooth module connected to my AIO board I have it plugged into S0 port, I have rx to tx etc.
I have droid planner2 installed on my HTC one, I can connect to the board no problem using the USB lead streight to my phone, change PID';s etc all works fine.

I can pair to the HB02 module on my phone and when I press connect in droid the light on the HB02 goes solid and I think I am connected as the option now changes to disconnect, however the woman in my phone keeps saying Data link Lost. 
It is like the board is not talking to the Bluetooth module, but I might not be connected as not certain what baud rate to use for the bluetooth.

[MultirotorParts]

baud rate is 115200

[barneyg]

As MRP says the FC is probably talking at 115200.  Trouble is most BT boards come configured for 9600 baud ... Have you connected your BT board to your computer and configured it ?

[SeamusOD]

As MRP says the FC is probably talking at 115200.  Trouble is most BT boards come configured for 9600 baud ... Have you connected your BT board to your computer and configured it ?

No how do I do that?
I dont have an bluetooth on my PC, so will probably need to get a dongle

[Biffa]

My experience of BT and the Crius board was a complete fail. Gave up in the end and used the 433 radio.

[barneyg]

you don';t use bt on your laptop to configure it you use serial to the tx and rx pins

http://www.multiwii.com/forum/viewtopic.php?f=6&t=133&start=50#p1515

[SeamusOD]

you don';t use bt on your laptop to configure it you use serial to the tx and rx pins

http://www.multiwii.com/forum/viewtopic.php?f=6&t=133&start=50#p1515

Ok thanks