Mini quad with fpv and gps

[dirtyharry]

Started my mini fpv quadcopter tonight.

Decided to also try out the mobius camera which is going to be the main fpv camera , but using the "stop frame" photo function , did a picture every 10 seconds and stitched it together with sonny vegas.

Spec of quad is:-

Hovership 3d printed frame
http://www.hovership.com/

Hobbyking 12a afro esc';s , 50x30 props, 2.2 ah 3s zippy compact

rcx motors
http://www.banggood.com/-X-Power-1804-2400KV-Micro-Integration-Outrunner-Brushless-Motor-p-923424.html

mobius camera ( for use as main fpv view camera as well)
http://www.ebay.co.uk/itm/1080P-HD-Mini-Auto-Record-with-Power-Mobius-ActionCam-Sports-Camera-Camcorder-/221259368601?pt=Camcorders_Professional_Video_Cameras&hash=item3384160899

Crius AIO board with GPS and bluetooth (ebay £30 for board and £8 for GPS)
http://www.ebay.co.uk/itm/1PC-Ublox-NEO6MV2-GPS-Module-Aircraft-Flight-Controller-For-Arduino-3-5V-/301178923053?pt=LH_DefaultDomain_3&hash=item461fa9a82d

Home made 5.8 ghz transmitter using boscam module
http://www.banggood.com/FPV-5_8G-200mW-Wireless-Audio-Video-Transmitter-Module-TX5823-p-84780.html

Have some tidying up to do and a bit of soldering , could also do with some weight reducing as up to 540grams and was hoping to make it less than 500g.

http://youtu.be/OgmGSmJxzR8

[atomiclama]

Wish I could work that quickly  ::)

[camerart]

Hi,

Nice video.  How the copter flying?

I';m interested in the motors you used.  Have they been reliable?

Are 50 x 30 props 5" x 3", I';ve never seen this way of describing them before.

Cheers, Camerart.

[dirtyharry]

flew OK , but had to replace rubber anti-vibration dampers as they were to soft and it oscillated  under high throttle.

Motors are reliable , but they are cheap and i';ve had a iffy new  one and some magnets came loose after a couple of crashes , there';s better ones out there for not much more.

props are 5030 gemfan , which are 5" x 3" , dirt cheap and work well

http://www.banggood.com/Gemfan-5x3-Inch-Plastic-5030-Propeller-CWCCW-For-240-250-Frame-p-937866.html