3d Printing Service
Printing 3d Forum
Started by steveo9007, Thursday,January 24, 2019, 16:32:56
Quote from: ched999uk on Thursday,January 24, 2019, 17:55:24 Re the built in power on the replacement camera you will need to connect the new camera gnd/0v to the quad gnd. So you need to connect video and gnd to the quad.Good luck.
Quote from: steveo9007 on Thursday,January 24, 2019, 20:36:55 Can i ask why this needs to be done Ched, the camera has its own power and will be mounted on a gimbal mount underneath, does the GND protect the video CVBS cable i don't know
Quote from: steveo9007 on Thursday,January 24, 2019, 20:41:49 https://www.ebay.co.uk/itm/Original-Onepaa-X2000-WiFi-Mini-2K-30fps-Aerial-FPV-Acton-Camera-145-FOV-HDMI/163191649857?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3Ddbde91f274b6498e80e85967b2257bc4%26pid%3D100675%26rk%3D6%26rkt%3D15%26sd%3D273645058464%26itm%3D163191649857&_trksid=p2481888.c100675.m4236&_trkparms=pageci%3A5c47bd1e-2018-11e9-98e4-74dbd18032b6%7Cparentrq%3A81982f701680aa47385e6dd3fffc3789%7Ciid%3A1This is the camera i am getting..
Quote from: ched999uk on Thursday,January 24, 2019, 22:56:12 Just had a very quick lok at the camera. Does it have a video out that is not HDMI? HDMI is purely a digital signal and I dont think it's compatible with CVBS which is an analogue signal!! It also says it does wifi!! This is 5.8Ghz and I think the Hubsan 501 also uses 5.8Ghz to transmit the video signal, they will probably interfere with each other. So you will have to either use the wifi from the camera to your phone/tablet but then you lose any On Screen Display and disable the vtx in the Hubsan or disable the wifi in the camera and get a CVBS signal out of the new camera and use the Hubsan vtx.
Quote from: ched999uk on Thursday,January 24, 2019, 22:49:18 Basically if you attach the quad 0v to the new camera 0v it acts as a reference plane. So the video signal is being referenced from the tied together 0V of both. Plus you need signal and 0v for any electricity to 'flow'. This is very much an oversimplification and not 100% correct but it should give you the general gist.
Page created in 0.122 seconds with 42 queries.