Open-Frame

[VinHex]

I can get use of a cutter for what ever is needed.  I';m going to to design from scratch a frame out of carbon will take some weeks but going for it..  This is totally new to me any help and guidance welcome. Need to look into materials and fitting for controllers ect this will be designed for WKM as already have kit. But nothing stopping centre plates to be changed for other controllers..

[Mslater]

I can get use of a cutter for what ever is needed.  I';m going to to design from scratch a frame out of carbon will take some weeks but going for it..  This is totally new to me any help and guidance welcome. Need to look into materials and fitting for controllers ect this will be designed for WKM as already have kit. But nothing stopping centre plates to be changed for other controllers..

Good luck, its taken me 14months to get mine done and 9 cuts at £230 per cut, my advise would be to ensure you 3d model the CAD before you try to cut and make sure your layers are correct. EG holes on one layer, slots on another, then inside cuts then outside cuts etc.

If I can help in any way let me know - just posted a pic on the forum of the completed V7 Octo Frame - take a look you might get some ideas from it. (or even spot a problem)

[VinHex]

Thanks for the info. Will take a look would be great if loads of people got together and made on open source sort one even possible.

The good news it would only be materials waisted at the moment as cutting would be free..