FPV Lines on Screen

[bunnygirl80]

Hi,

Just ventured into FPV on a FPV Glider, have some interference on the ground station monitor which gets better / worse as the speed of the motor increases / decreases. Can anyone recommend anything to get rid of this?

Thxx.

[Rudeboy]

LC Filter on the Vtx power supply possibly.

[Jumpy07]

You need a decent LC filter on the power feed of the video TX  if you dont have one fitted..  which might cure this
http://www.ebay.co.uk/itm/261122287074?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

[mickyt]

Hi Stef having had similar probs myself when i started i was told to make sure all my vtx and cam wires were twisted,as this help';s reduce electrical interference it does not get rid of it completely but helps reduce it also lc filters on the vtx power feed.
I have seen wires platted and i actually have my speaker cables platted again to reduce  electrical interference. Slightly off topic but if you look on kimber cables website you';ll see what i mean its just a suggestion try and keep everything spaced out and not sitting right on top of one an other hope it helps a little.

[bunnygirl80]

Hi guys,

As you guessed, FPV is new to me and I';m trying it on the glider first. I don';t have one of those filter things so I';ll order one today! Thanks for the ebay link, makes life easier!  ;D

Thanks,

xx

[pheasant_plucker]

Sometimes looking through the prop causes this.

Gerry