New Baseflight software out

[Hands0n]

As seen in Baseflight GUI.  Sounds like an important fix for those using PWM.

[barneyg]

Ok to summarize the Baseflight thread :

basic problem seems to be :

• Only affects PWM mode (a connection between RX and FC for each channel)
• The board stops working and the motor output stays constant - Battery removal is required to stop motors spinning
• appears to be OK in Acro mode but affects modes that use the accelerometer.

Confirmed with PWM receiver - PWM interrupt reshuffling introduced some race condition in I2C driver. Will debug and see what';s up.
Should not affect PPM receivers.
For now, go back to some older build, something from early April should be OK.

Though now fixed in the current firmware.

[mrmurder1975]

cant believe i missed this danny! sounds exactly like the problems i have been having. thanks for posting it and thanks to barney for pointing it out to me