X450 + CC3D + SkyWalker Integrated ESC build log

[icedfusion]

So, whilst I am waiting for parts for my TBS, thought I would start another build for a CC3D!

I purchased 2 of those sky walker integrated 20A ESC';s so it will be interesting to see how they fare.
I opened one up to see if it could be flashed with simonk firmware, but alas, it cannot - it contains the SIL IC so no go!

The Frame with the ESC box mounted, i have to say, it does make things very tidy! I braided the wires as they are ';very'; long and I didn';t want to cut them up just yet.


Close up of it on the frame:


My handy work on the wires:


With the CC3D hard mounted. I want it to be hard mounted so I can see how it compares to an Afro32 I have mounted the same way on the same frame



View from the top


Did this during my lunch break -

Motors are some heavy duty 200w affairs - so will see how they perform!

ice.

[Gaza07]

Looking very good Ice they certainly look nice and neat  wheres the 450 frame from its not the same as the ones we have all been getting from rctimer 
Look forward to seeing your reports on the esc and the CC3d 

[icedfusion]

The frame is actually a SK450 - it is a clone of the xaircraft 450, it is a very light frame - but it does not contain a power distribution board. I like it for its weight, but it still suffers from mega vibrations in the frame.

http://www.hobbyking.com/hobbyking/store/__24291__Hobbyking_SK450_Glass_Fiber_Quadcopter_Frame_450mm.html

ice.

[Gaza07]

Thanks for the link Ice not a bad looking frame