Naza 2 and Turnigy plush 30A?

[John A]

Hi,
I am converting from a KK2 FC to a Naza m V2. I am using Turnigy 30A plush ESCs and Sunnysky 22/12 980KV motors.
Question is can I leave the Plush 30A control leads as they are with all three connections (power, signal and ground) or is it advisable to remove the power lead, leaving only the signal and ground? I feel a little uncomfortable pulling wires out of connectors but don';t want to let the magic smoke out of anything...especially the Naza. Any advice would be most welcome.

Thanks,
John A

[Hands0n]

I left all mine in place with the Naza M Lite. The cables that were supplied with the FC had all three leads wired up.

Sent from my C6603 using Tapatalk 4