tarot fy690s need advice

[secretman]

hi gan, i need new motor setup, on the tarot i think i can put 13" propeller max and i want to put the max i can put on,

im in a dilem, rctimer 5010 620, rctimer 5010 530, Turnigy 5017 620kv ,
3508_700KV_Turnigy_Multistar that i found a bit expensive..

i need good lift on 13" prop low amp draw,on 3s  and later i will do 4s
the rctimer one are nice priced but the only review i found is on the site and pep say, like on 6 motor 2 doa... some one have test the rctimer one??? and what';S the verdict??

some one have better one for me ???

[secretman]

anyone??

[Cloudbuster]

try the EMAX MT3510 these are very efficient when using 3';s setup and you will get about 1400 grms thrust using the large props, i would go for 13/55 (tarot ones are very good !!!)

regards rob 

[secretman]

im going for http://www.iflight-rc.com/product/iPower-Brushless-Motor-iPower-iBM-Q-iPower-iBM4008Q-620KV.html
and 13x5.5 carbon prop t motor styl.

on ecalc it';s perfect, but i have order 12x4.7 ans 13x4.7 slow prop for test before order the carbon one,
i hope getting my new setup in 2 week lol

[secretman]

i order motor from hk
http://www.hobbyking.com/hobbyking/store/__41485__Turnigy_5017_620kv_Brushless_Multi_Rotor_Motor.html
they are not 5017... hk always calculate the outer diameter not the stator