PPM Sum (CPPM) channel mapping for MPNG 3.0.1?

[QuadBod]

Anyone figured out how to map the receiver channels to the appropriate controls in MPNG 3.0.1R2?

CPPM is working (seems to be enabled by default) but all he channels are mixed up... (JR radio has throttle channel 1, yaw channel 2 etc)...

Ta!

[sevet]

The 3.0.1-R2 default configuration is just like on APM which is what used to be on prior to MPNG 3 the: standard configuration.

I have the same profile for Crius MPNG and APM with Arducopter.

You can remap it on the conf but I suggest you line up to the standard configuration, here is howto:

http://www.megapirateng.com/how-to-configure-mpng-3-0-1-firmware/

Section 4 on that link.

[QuadBod]

Nice one, thanks sevet! Had found that code, but missed the obvious!