Welcome to Multi-Rotor UK. Please login or sign up.

Saturday,August 24, 2019, 03:22:14

Login with username, password and session length


23 Aug 2019 19:26:42
I agree it does look a lot better for some reasom SMF shorten any recent posts display  :rolleyes:
23 Aug 2019 10:29:15
Nice! Looks loads better.  :beer2:
22 Aug 2019 22:47:32
Sorted mate  ~~
22 Aug 2019 10:27:36
Sure. But basically, all the subjects are getting cut off.
21 Aug 2019 18:14:54
Can you pm me a screen shot of what you mean
21 Aug 2019 12:15:41
Gaza - can you make the subject line section in the forum topic list wider? It's cutting off the subject field really short.
19 Aug 2019 09:14:20
Good for you!  ~~
18 Aug 2019 19:13:57
Had another negative encounter, it's been a few years since the last one, just an uneducated ******, going on about drones being illegal yada yada yada.    :-/
Still that didn't spoil my flying time, had an absolute blast  ~~
07 Aug 2019 19:52:01
ooooh mrs jones  :D
30 Jul 2019 15:26:34
D.B. you tightwad.. :cool:
  • Total Members: 8066
  • Latest: badger1
  • Total Posts: 196581
  • Total Topics: 19804
  • Online Today: 62
  • Online Ever: 530
  • (Tuesday,June 26, 2012, 08:34:46 )
Users Online
Users: 0
Guests: 36
Total: 36

Theme Changer

3d - Printworx

Printing 3d Forum

bit of info please guys

Started by paulcobra, Thursday,September 20, 2012, 13:44:38

Previous topic - Next topic


Right decided to go the all in one pro route, what other bits do I need for powering this up etc, on my helis it was done through the esc. Also do I need to do any programming?  & anyone got a rough guide for setup? I have found a guy on Ebay doing these in the UK for 45 + 3 quid post is that reasonable or should I just order my frame etc and flight controller from rctimer


I would just hang fire because the word is the AIOP v1 is going to be replaced by the v1.1 not sure what the differences are yet but it might be worth waiting, the gps has just been updated to v2 and is quite a bit better  ~~

I have the AIOP v1 now out of date and 2 x Cn-06 v1 gps modules now out of date its getting rather annoying  :angry:


Here you go Paul the new one is now on the site, just didn't want you to buy a v1 then find out it changed to a v1.1 the next day  ~~


Not sure what the changes are besides coloured plastic around the pins and a beefed up usb port  :rolleyes:


Just ordered one, along with the nav unit, v2 GPS and the 450 frame with motors,esc and props. Paid the extra 2$ post like you recommended .


When you say nav unit do you mean the Gps ? or have you ordered a nav board Im asking as you dont need the i2c nav board with the AIOP  ~~


I ordered both, are there any other sensors that I might need or any other bits, I'll just sell the nav board or swap it maybe.


long as you have the AIOP and GPS on order you should be fine, you might want a blue tooth module and maybe a sonar but not essential, although once ive loaded the firmware I always connect via blue tooth to avoid the pulling the usb port off  ~~

Just thought I would add you don't need a sonar for multi wii its not supported yet  :rolleyes:


Need to look into how many channels I need on the ex now and how IM going to power both.