CarbonCore H950 HEX

[Jumpy07]

As some of you know I bought a CarbonCore H950 Frame from one of the members on the forum. I have been rebuilding this from a Y6 into a HEX for AP work. After waiting on parts for ever .. I have now finished it.. pics below.

CarbonCore H950 in HEX Config
Tiger Motors
Xoar 16x6 Props
Hobbywing Platinium ESC';s
DJI A2
DJI iOSD Mk2
Mini WDR Camera
ImmersionRC 5.8Ghx TX
Sony NEX
GoodLuckBuy Carbon Gimbal with 4008 Motors
DesireRC AlexMOS Gimbal Controller
HDMI to composite Converter for NEX
RC IR Trigger for NEX
FrSky X8r 16 Channel SBUS Rx with 8 Channel PWM
2 x 5000ma 6s Zippy Compact Lipo';s
6s to 12v VR for Gimbal and Video gear

Ground Station:
Taranis TX
7" LCD Monitor with Diversity
Secraft TX Tray

[FlyinMarty]

Looks bloody awesome

[bunnygirl80]

Wow! Looks amazing Craig. That';ll be a superb platform for your bnuc. xx

[guest325]

Amazing, some serious kit you';ve got there!
Good luck with your future ventures!

[Cloudbuster]

That is one badass looking hex, very nice build !!!

Regards rob 

[RobertBrown]

fantastic

[Jumpy07]

Now with A2 fitted

[ericb]

I can see where your going with this Craig......this one looks lighter ?  WWWWHHHHEEEEEEEEEEEEEEE

Head Copter

If you get stuck for a few quid, you could scrap all the cables

[Jumpy07]

Some people already call me a helicopter head lol

[nickyb]

..really nice looking hex. I like to CarbonCore, especially the GPS antenna mounting part at the top.

Nice one

Nick

[Nautilus]

Now with A2 fitted

very clean build  ++ form me

What is the fight time ?

What is the take-off weight ?

[Jumpy07]

very clean build  ++ form me

What is the fight time ?

What is the take-off weight ?

Cheers.. take off weight 6kg, flight time @16mins on 2x5000mah 6S

[Gav]

looking good!

[VinHex]

Looking good buddy, nice build..    
Have you checked the prop balance on the woody';s yet? Interested to see what they come out at.. 

Vin

[Jimbodiddly]

Liking that a lot!

[Jumpy07]

Looking good buddy, nice build..    
Have you checked the prop balance on the woody';s yet? Interested to see what they come out at.. 

Vin

I havent yet Vin.. the Xoar';s are supposed to be pre balanced.. but I know Stef said her';s were well out.. so next job

[Jumpy07]

After messing about with the Gimbal on the Hex and not getting anywhere (design issues on gimbal), i decided to go looking for a 3 Axis.. initially I fancied a Zenmuse for the Nex.. but was out of my price range..  I then came across one of these..


[attachimg=1]


It kinda looks like a poor mans Zenmuse..


Rctimer 5010 motors
Sliprings on all the motors for cables..
Its made of ali and carbon.. but mostly ali.. weighs in at 760g   (Zenmuse is 1.3kg)
Came with genuine Alex Mos bascam board..including third axis controller


Its actually well made..   only things I dont like ..  cables very short and not fully run.. you have to do this yourself..  and no mounting for controller board..


It wont do 360 on pitch or roll axis like Zenmuse.. but then again who needs to.. 


it is very well balanced.. which impressed me..  and the pivot points have proper bearings .. ie: they dont hang on the motor bearings..


I ordered a  new smaller HDMI converted and IR trigger..   have started sorted the wiring out.. will have control for shutter, and pitch.. the rest will be on auto


Its a lot shorter in height than my old gimbal.. so have mounted it as far forward as possible.. but might need some spacers to drop it down if prop is in view..


Have to print a box off for mounting controller yet.. .. spent most of the afternoon soldering all the wires and not finished yet.. but here is a dummy fitment up to the Hex..


[attachimg=2]
[attachimg=3]


More pics and updates when I have it finished and up and running

[neil-liverpool]

looking good , cant wait to see it in action

[Jimbodiddly]

Ohh very nice !

[Desmoboy]

Thats nice jumpy, can you point me to a link please where i can see prices etc.
Thanks
keith

[Jumpy07]

Thats nice jumpy, can you point me to a link please where i can see prices etc.
Thanks
keith

http://shop.carboncore.co.uk/
http://www.thanksbuyer.com/fpv-3-axis-brushless-camera-gimbal-camera-mount-ptz-w-3pcs-motor-and-controller-for-mini-slr-sony-5n-aerial-photography-26482
http://www.firstpersonview.co.uk