New Frames DRQ100 and DRQ200 Brushless Gimbal

[ubay]

Hello everbody here are my latest frames that will be sold soon in www.droneframes.com. Different colours will be available as well. I hope you like it.


Both frame consist of Dirty and Clean parts.Dirty part includes ESC power dist board.

On th other hand vibration damping system is splitting the frames clean and dirty parts. Therefore you can easily take jello free videos.

And also there are many screw holes on clean parts vibration damper placement If you want to adjust your CG you can slide the clean part back and forth . So you can use different types of battery.(4S 3300mah,4S 4000mah And 4S 5000mah Batteries)

Frames sizes are motor to motor 450mm with 195mm aliminum arms which support up to 10" props. If you use bigger arms (215mm) it goes up to 500mm which support to 11" props. Motor placements are already drilled to 19mmx19mm on aliminum arms. After my tests, i have decided to holding motors with 2xM3 screws and never had any flight problem up to now.

DRQ100 version is just 375 gr. without electronics. If you change the clean parts bottom plate (just one plate) it can be easily upgraded to DRQ200 BG. After this modification you can have BG version.

For the CCD camera placement there are also standoff holes behind the Gopro placement.So you can put your CCD camera using standoff.

BG s upgrade parts total weight is just 135gr including brushless motors.

You can fly up to 14min. with 4S 4000 mah batteries., Tiger 2216-12 800Kv motors and F30A simonk flashed ESCs.



I will share the BG versions video pretty soon. I hope you like it. And if you have any recommendation please share with me. Thanks in advance.