Welcome to Multi-Rotor UK. Please login or sign up.

Saturday,July 04, 2020, 15:42:04

Login with username, password and session length


04 Jul 2020 13:16:48
VIDEO or it didn't happen!! :) Nice going though, keep it up!
Bad Raven:
02 Jul 2020 19:46:48
whoelseisbored (LiamHowe89):
02 Jul 2020 17:45:19
Sounds basic but I'm happy with it  :laugh:
whoelseisbored (LiamHowe89):
02 Jul 2020 17:45:05
Managed a split s :D
28 Jun 2020 12:29:49
BF GPS Rescue mode configured - what could possibly go wrong?   :o
27 Jun 2020 21:07:37
and can't make it back to where you take off from   :laugh:
27 Jun 2020 21:07:04
it's too windy if you fly downwind
Bad Raven:
27 Jun 2020 20:51:32
I have done Dynamic Soaring in over 55mph, and quad flying in over 25mph with the right equipment.
whoelseisbored (LiamHowe89):
26 Jun 2020 16:44:24
How windy is too windy? :hmm:
whoelseisbored (LiamHowe89):
25 Jun 2020 22:58:29
YASSSS!! Flew a full 2 packs and no motors going nuts on me!  :D
  • Total Posts: 198951
  • Total Topics: 20050
  • Online Today: 20
  • Online Ever: 530
  • (Tuesday,June 26, 2012, 08:34:46 )
Users Online
Users: 0
Guests: 16
Total: 16

Theme Changer


3d - Printworx

Printing 3d Forum

Easy Esc Calibration

Started by Gaza07, Monday,August 13, 2012, 17:41:29

Previous topic - Next topic


I made a little connector board to be able to calibrate multiple esc's at once, heres a couple of pictures so you can make your own if you want, its uses a piece of vero board just 3 rows some pins and a servo lead, it can be made as long or short as you require  ~~


Not the best soldering in the world but it works  ;)


Looks good.

Are there any other advantages to doing it this way apart from saving time?

I need to get myself a bunch of pins so i can make things like this.
One circlip short of a quadcopter.
 1 lobe short of an antenna.


The main reason is to save time and also I put the leads on to it in the order they go back on to the flight controller it just makes things easier quicker and in my case simpler  :wack0

Check out this seller on ebay you get 20 strips at a price that cant be beaten

Lots of other usefull goodies on there to, although they dont sell the 3 way bent pins  :shrug:


I've cut apart the Kcopter flight control board that wasn't working and I've used the pins from that;

I soldered it up on the reverse side to connect all the rows. It's good for a hexacopter and i only have quadcopters at the moment. I'd have been good for an octocopter but my soldering went a bit iffy at the end and i connected pins that shouldn't have been so had to cut the last couple off.
One circlip short of a quadcopter.
 1 lobe short of an antenna.