3d Printing Service
Printing 3d Forum
Started by rsmith21, Wednesday,May 15, 2013, 21:17:19
Quote from: rsmith21 on Wednesday,May 15, 2013, 21:28:43 I doubt its that, I';m still learning so short hovering inside only just now to get the hang if it, so full batteries no load etc. I';ll see if I can catch it on video.
Quote from: MOFO64 on Wednesday,May 15, 2013, 22:38:11 The beeping and/or screeching is the low battery warning. At a guess you';re using a 20c rated lipo yeah? The I-Fly4 needs atleast a 30c rated lipo to provide enough juice. I had the same issue when I purchased mine......I was using a 2200mah 20c lipo.
Quote from: MOFO64 on Thursday,May 16, 2013, 09:30:54 Ah you must be doin'; okay then since we';ve all done that! lol. Luckily my shroud only got a few chunks taken out the back end so I just cut it a little shorter. You can put a zip-tie/cocktail stick etc through the eyelets in the four plastic pins which secure the shroud on, this prevents the shroud from becoming detached during flight. Not sure if you';re aware of this place for I-Fly spares - http://www.modelhelicopters.co.uk/helicopter-spares/standard-spares/iflight/ifly4-quadcopter.htmlThey';re really good on price and are very quick :).
Quote from: rsmith21 on Thursday,May 16, 2013, 22:41:20 Great tips and a good site, I';ve ordered the carbon fibre props and skid foam The screeching was the battery low warning, I managed to replicate it today and changed the battery, the sound stopped
Page created in 0.221 seconds with 42 queries.