Welcome to Multi-Rotor UK. Please login or sign up.

Monday,November 18, 2019, 16:40:49

Login with username, password and session length

Shoutbox

ched:
18 Oct 2019 11:25:16
Sounds good yama. Would love to see some images. 3d models sound cool too
yama:
18 Oct 2019 10:32:38
i might have to do a review. the 21mp camera is excellent at producing high quality 3d models for mapping.
ched:
10 Oct 2019 16:56:16
Show us some picys and maybe post a review in a thread?
yama:
09 Oct 2019 14:13:10
must admit this anafi is tiny and looks like a toy in a lunchbox but performs like a professional product.
yama:
09 Oct 2019 14:11:52
went ahead and bought one. about to find out if the 21mp camera improves photogrammetry surveys.
ched:
08 Oct 2019 17:14:17
Not tried a parrot anafi but I thought parrot were stopping 'drone' production?
yama:
07 Oct 2019 13:25:37
anyone tried a parrot anafi?
Gaza07:
26 Sep 2019 11:33:59
We know a song about that dont we  :D
Andy7:
26 Sep 2019 08:38:34
 :laugh:
Bad Raven:
26 Sep 2019 07:10:39
Adopts Australian accent "Black, that's not Black, its a dirty grey, THIS is Black........"   :D
Members
Stats
  • Total Posts: 197136
  • Total Topics: 19878
  • Online Today: 47
  • Online Ever: 530
  • (Tuesday,June 26, 2012, 08:34:46 )
Users Online
Users: 0
Guests: 37
Total: 37

Theme Changer





thumbnail

3d - Printworx

Printing 3d Forum

Fs-ia6b connected with sp racing f3 problem

Started by Ardzej, Saturday,July 13, 2019, 19:43:24

Previous topic - Next topic

Ardzej

Hi i connected receiver to fc, controller is binded with receiver but when im in betaflight nothing happens in ,receiver' overlap, of course all setting are made for ibus connect








ched

It looks like you are using the 8 pin connector IO_2! It might be better to use UART2 which is close to the usb and labelled uart2. Check the pins before you plug the rx in. Then set the rx in BF.
Hope that helps?
I try :-)

Ardzej

meybe you know which pin is gnd +5 and signal? uart 2 have 4 pins

ched

Quote from: Ardzej on Saturday,July 13, 2019, 20:26:52 meybe you know which pin is gnd +5 and signal? uart 2 have 4 pins
Having a look here: http://wiki.sunfounder.cc/index.php?title=SF_Racing_F3_flight_controller
It would appear that you can use the 8 pin connector that you are using.
On the connector you are using:
1 = GND
2 = VCC
3 = CH3 (UART3 rx)
Then make sure that uart3 is selected in the ports tab as the serial rx. UNLESS uart is for USB!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Then on the config page select flysky and ibus.
That should get you up and running?
I try :-)

Ardzej


Quote from: ched999uk on Saturday,July 13, 2019, 20:54:21 Having a look here: http://wiki.sunfounder.cc/index.php?title=SF_Racing_F3_flight_controller
It would appear that you can use the 8 pin connector that you are using.
On the connector you are using:
1 = GND
2 = VCC
3 = CH3 (UART3 rx)
Then make sure that uart3 is selected in the ports tab as the serial rx. UNLESS uart is for USB!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Then on the config page select flysky and ibus.
That should get you up and running?

Thanks for helping me,
if i understand i have to connect here?


ched

It should work with the connector as you had it in the initial photos. Just make sure you set the correct uart in the ports tab to be a serial rx then in config set serial rx flysky and ibus. Then you should be fine.
I try :-)