Build you own freestyle or racing quadcopter - Step by step guide using a 5" Tyro109

[BillM-RC]

Hi fellow rc pilots & rc enthusiasts

Eachine Tyro109 review – Full Build & assembly step-by-step guide.  This Eachine Tyro109 210mm DIY 5 Inch FPV Racing Drone PNP w/ MatekF405 F4 FC, 30A Esc, 600mW VTX & Caddx Turbo Eos2 1200TVL Camera build video is long, but shows every step of the process required to assemble this and includes tips & advice during this process too. This is to show anyone interested in building this Eachine Tyro109 or their own first freestyle or racing fpv quadcopter drone how this is done, and to assist make this build easier for anyone that purchases this. I hope you find this informative & helpful.

You can get this Eachine Tyro109 210mm DIY 5 Inch FPV Racing Drone PNP w/ MatekF405 F4 FC, 30A Esc, 600mW VTX & Caddx Turbo Eos2 1200TVL Camera  build kit here: http://bit.ly/2Zn41Te

https://www.youtube.com/watch?v=rjq16tWYyRU

[steveo9007]

Great build Bill, got a couple of tips myself having built the Tyro99 if i can add them here.

1. Assemble the bottom frame first before adding motors as its less fiddly.

2. Fold the Black control cable from ESC board to FC board in so that it is sandwiched between both boards, this way it will avoid getting caught and pulled out as it sticks out a lot if not tucked in.

3. On the 99, i had to file the VTX Antenna mounting down as there was not enough threads showing to completely fix the Antenna on the the threads, looking at your build it looks like the same only a couple of threads showing.

All from my experience in building the 99. :-)