Furious Kombini fc

[trebor]

Lost one of my motor feeds, to start with I suspected an esc but ran the motor and esc on its own with no problem. Re connected to fc still no good.



Tried to update on Betaflight, that went ok tried to run motors only running 3 out of 4. tried re tuning still no go. Went on Bl Heli this was only showing 3 motors not 4 what do you recon ? any tips or ideas ? Fc toast or repairable ?

[Cheredanine]

Not used the kombini mate, nothing leaps out on the pictures, however is you have a spare pad connected to a DMA timer you can always remap the motor resource to that, solder the signal wire to it and off you go

[trebor]

I fed it a few different versions 

[trebor]

I did have this set for Spektrum sat using a Lemon sat but I had trouble getting it to change to sbus n Frsky so I installed a new version to fix that problem. What do you think would be a good replacement ?

[Cheredanine]

ATM helio spring is my favourite

[trebor]

Bingo, maybe my board has not got D-shot    https://furiousfpv.freshdesk.com/support/solutions/articles/43000054964-what-target-should-i-choose-
Switched it over to Piko blx and off she went.

[Cheredanine]

Easy to test, switch to oneshot, see if the motor spins up
But if so that’s crap, dshot came in a couple of years ago, you had to work around it for a few boards (it’s somewhere on the bf wiki) but by now all F.C. should run it
Edit:
Yup here was the details when dshot was introduced:
https://github.com/betaflight/betaflight/wiki/DSHOT-ESC-Protocol
Any F.C. developed after that should run it

[trebor]

Thinking about it the quad is coming up to a couple of years old and I didn't use it so often.