Motor recommendations

[Hozza]

So last Friday I seriously killed my Air-Ro crashing into a viaduct, I thought the damage was a lot worse at the time...

All I need is new motors and a FPV camera, I was running T-motor F20 II 3750kv do I buy these again or is there another option?

Cheers Paul

[hoverfly]

I have two Air-Ro  with the  F20  ll and  really rate them.
Very good  punch out,and not current hungry.

[Cheredanine]

Hozza.
4 inch quads generally use 1407/6 3600kv pretty well.
The brother t1s are sort of the bench mark
The only motors that give more performance I have found are the f20ii and brother 1507 4100kv. The brother though eat lipos, the 3600kv may be a better option

[Hozza]

I can't find the F20's in stock, well not all 4 in stock, T1's I'm struggling to find too

so considering Brotherhobby Avenger 1507 3600KV

[Cheredanine]

I can't find the F20's in stock, well not all 4 in stock, T1's I'm struggling to find too

so considering Brotherhobby Avenger 1507 3600KV

As I say mate, I only tried the 4100kv, they are very nice motors, but they ate lipos, assuming 3600kv will be less power hungry

[Hozza]

As I say mate, I only tried the 4100kv, they are very nice motors, but they ate lipos, assuming 3600kv will be less power hungry

I've gone for the Avenger 3600Kv, next time I must try and stay off the throttle

[Hozza]

All back together and flying nice, needs a little bit of tuning but first impressions of the Avenger 3600Kv motors is good