Cannot bind R-XSR and Taranis QX7

[WYSIWYG]

I got it sorted. Thanks Paul01.I know now where I made a mistake. I had a careful look at the second video regarding updating firmware of radio and receiver. The video concentrated mainly on updating the receiver. It mentioned the XJT firmware but did not actually show or instruct that you had to do it to the internal module. It just shows him putting all the files in the firmware folder and then flashing something using opentx then flashing the receiver via the cable from the back of the Tx .

THANKS AGAIN TO ALL WHO CONTRIBUTED TO MY PROBLEM.

[Paul01]

No problem, glad you're sorted.

Sent from my SM-G950F using Tapatalk

[Michael Navigator]

just in case you need the description for the internal module flash in german ;-)

https://youtu.be/8qd4w1zUdWg

[Ostrogotto]

Thank you very much guys! I can't really understand why it is so difficult to explain the story of internal Xjt module everywhere ( productor, forums, hundreds of youtubers....) execpt here!!!
Thank you again