Matts PVC Hexacopter

[MattsPVC]

My PVC Hexacopter.

Made from: (1/2inch) PVC adapters and pipe.

And Using:

Rabbit Flight Control Board.
NTM 28-26 1200kv Motors
Gemfan 9x4.7 propellers
HiModel Pro 18s ESC
Zippy Compact 3s 4000mah 25c Battery


Flight Weight 1738 grams. (No Payload)
Flight Time 11 minutes. (No Payload)

Flight Weight 2050 grams (With Gopro and Tilt Mount)
Flight time 8 minutes (With Gopro and Tilt Mount)

http://youtu.be/kx4wbiUevq0

[Gaza07]

Very good Matt another unique design that flies well, and sounds nice and loud to 

[MadMax]

Looks good but when you refer to the pipe as 1/2" or 15mm is this the outside diameter or the inside diameter, I ask because it looks bigger than 15mm, and I just thought 15mm might flex a lot 

[Gaza07]

The 15mm pipe we use here would be to flimsy and would bend to easy, there has been a few pvc copter projects here but they have used electrical conduit or over flow pipe which is stiffer and around 22mm

you can see the pvc quad here http://www.multi-rotor.co.uk/index.php/topic,74.0.html