3d Printing Service
Printing 3d Forum
Started by jimbo385, Friday,April 05, 2013, 13:42:15
Quote from: jimbo385 on Friday,April 05, 2013, 13:42:15 Hi, I have a converted JR PCM9X2 transmitter with the DJT TX module and the FLD-02 LCD screen. I will also be using the Crius V2 MCB.Which is the best telemetry RX to use?There is the D8R-XP, D8RSP and the D8R-II Plus 8.Also, can I pass any data from the control board through the RX to my TX and LCD?Many thanks.Jim
Quote from: jimbo385 on Friday,April 05, 2013, 17:20:26 Hi SimonS,Thanks for the link but I';d already seen that. What I wanted to know was whether I could use FRSKY to display some of the data from the Crius board. This would, for example, save me buying the Sensor Hub, GPS and Variometer modules as this data would be available on the Crius board with a GPS module.Hi Barneyg,I must admit that I have several telemetry Rx';s and have never flashed one! What does the SUM-PPM do and is it worth getting for MultiCopters, well any model?Many thanks.
Quote from: jimbo385 on Friday,April 05, 2013, 20:10:03 What is the ppm pin for on the Crius board?
QuoteWith a suitable FRSKY RX, would I be able to use CPPM to the CRIUS board as this would greatly simplify the wiring!
Page created in 0.348 seconds with 42 queries.