How to contact developers of LibrePilot

[suzygs1000]

HI, I am new to this forum.  I have been flying planes for about 6 years, and 6 months ago,decided to try quads. I built a couple, and used KK2.1, which seems to be ok.  I recently purchased a Quanum kit.  This kits requires that the FC be mounted underneath the frame.  It is very difficult to do this with the KK2, as you then have no access to the buttons.  I had a couple of CC3d';s I had purchased but never used.  I downloaded the Openpilot GCS, and managed to upload the program to the CC3';d, and must admit I preferred it to the KK.  It is also a breeze to mount it underneath the frame.  I tried to upload openpilot onto the unused CC3d, but now openpilot refuses to work, giving me a run time error.  I downloaded LiprePilot, but it won';t run either.  I am using Windows 10. Both programs get a runtime error while booting.  I contacted Microsoft, who didn';t have a clue.  They suggested that I contact the developer, which can be difficult with opensource software.  According to Windows log file, the problem is caused by file libstdc++-6.dll.  I found this file and deleted it, but the program won';t run then either, saying it is missing file libstcc++-6.dll.  Can anyone tell me how I can contact the developer, as this now means that I have no way of using CC3D flight controllers.

[Fletch]

If you don';t find an expert on here

Try https://forum.librepilot.org/index.php

[atomiclama]

as this now means that I have no way of using CC3D flight controllers.

Stick CleanFlight or BetaFlight on it, works very well.

[iRobot]

Hi, I';ve had similar issues with ';timed out'; on the cc3d, try erasing openpilot on the computer completely, ';re-install making sure it';s the correct up to date software, a different usb lead (not a charge only cable) ant keep trying 

Great videos from Painless360
Introduction to CC3D: https://www.youtube.com/playlist?list=PLYsWjANuAm4r-E61stLchCR4bzY3NmDNh

[gb0wers]

Did you ever get this resolved please?
I have a revo on the way and hope I haven';t made a mistake.
Graham

[Tomcatt]

So for us Micro CC3D owners and others, upgrade to CleanFlight or wait for an update?


Sent from my iPhone using Tapatalk

[atomiclama]

Is the micro CC3D any different in pin assignments to the normal one ?

If not then stick CF on it.

[Tomcatt]

It';s the same as the Atom BUT there';s 2 mini 3 pinned ports in the front that I have no idea how to use them.  I know the supply power because with the connector that cable that came with it can power my receiver.  The 3rd wire is unknown.  I was hoping it would support the S.Bus protocol but nothing happened.


Sent from my iPhone using Tapatalk