LED'S for quads

[bomber]

Hi,
Wheres the best place to get strip leds for quads,that just plug in?

Thanks simon

[Balders]

I use Giant Shark led strips.  Cheap as chips but you may need to make up your own connectors depending on what you want to plug them in to.  They are fine up to 4S.

[sendtohim]

these are the ones i used on my f550 http://www.fast-lad.co.uk/store/advanced_search_result.php?keywords=led&osCsid=9733b48971628d50688e8f1557d42fb2&x=0&y=0 if they come too long you can cut then down to fit

[bomber]

Thats great,,thank you...do you just plug them into the receiver?

[sendtohim]

they come with just a + and - leads and iv soldered them to the main board where the esc connect to so i run them on all the time you can put a switch in but i find they are a real help with green up front red on the rear and purple on the sides

[Balders]

The giant shark ones are not going to get enough voltage from a receiver. I run mine typically off 3 cell balance plug.

[bomber]

Oh,ok thanks..ive just bought some..so i need to get a connector to fit the ballance plug?