3d Printing Service
Printing 3d Forum
Started by JT, Wednesday,June 24, 2015, 16:55:28
Quote from: JT on Monday,July 06, 2015, 09:47:48 A turnigy 2826 2200kv with a 6x5. A 7x5 would be better but may make my 30A ESC a bit warm lol. My mates tek sumo that I follow in the video has a 1450kv and a 7x5 and seems a bit slow, I would have thought with a 2200kv on a 6x5 the sumo would be fast, that';s what I run on my wing wing and that';s good for 60mph a 7x5 though should be even better
Quote from: Chippercheese on Monday,July 06, 2015, 14:29:11 I use the NTM 2836 1800kv with a 7x5 prop, burst current is something like 29A on launch (basically prop stall), cruises at 4-5A and maxes out around 18A in full flight. Fastest I';ve got it to was 112km/h - with ain';t half bad IMO!Just bumped my ESC up to 50A with SBEC to try and give it some overhead as 30A was getting hot cooped up in the fuselage in sunny weather (although I did cut some vents into the lid on saturday).Expo is definitely crucial for this wing, I find my happy place around 35/30
Quote from: JT on Monday,July 06, 2015, 16:32:30 112kph is pretty good, I need to throw an OSD on mine(might just pinch the remzibi off my wing wing for now). I';m going to chance a 7x5 with my 30A ESC, it was fine with the 6x5 and I';m not going to beflat out constantly, hopefully be more efficient for chilled flying(or not lol) Good work in the clouds, was your video signal OK?
Quote from: nub on Monday,July 06, 2015, 23:00:01 nice maiden video JT looks like that';s going to be a lot of fun! ::)
Page created in 0.110 seconds with 42 queries.