Welcome to Multi-Rotor UK. Please login or sign up.

Friday,September 20, 2019, 10:31:49

Login with username, password and session length

Shoutbox

ched:
31 Aug 2019 20:37:03
Looking forward to BFU #9 footage  :D Hope you all had a great time
Gaza07:
31 Aug 2019 04:46:44
Hope you all have a great day today at the BFU 9  :beer2:
dp106:
29 Aug 2019 11:19:07
try again now, hopefully it should be resolved...
Gaza07:
29 Aug 2019 11:17:40
Should be fixed now
hoverfly:
29 Aug 2019 11:12:33
replies with only a few words are being rejected as file too big.. :hmm:
dp106:
29 Aug 2019 11:09:33
3D Site also affected
dp106:
29 Aug 2019 11:09:11
Gaza is on the case
dp106:
29 Aug 2019 11:09:03
there are currently issues with the forum
dp106:
29 Aug 2019 11:06:07
test
ched:
28 Aug 2019 17:28:19
Cheers Andy7.
Members
Stats
  • Total Posts: 196830
  • Total Topics: 19836
  • Online Today: 28
  • Online Ever: 530
  • (Tuesday,June 26, 2012, 08:34:46 )
Users Online
Users: 2
Guests: 43
Total: 45

Theme Changer





3d - Printworx

Printing 3d Forum

Bluetooth ache

Started by hibbo, Wednesday,January 23, 2013, 21:33:30

Previous topic - Next topic

hibbo

Good evening people.

Right then here we go.  I have a bluethooth module HC-07 and have been trying for a while now to get it to work with my Crius SE.

On the adapter there are VCC, GND, TXD, RXD connections,  I have tried to connect these in different variations to the TTL and the FTDI connections on my board.  I can get the bluetooth module to connect to both my computer and my phone but cannot get any readings on wingui.  My bluetooth is on port 40, I have tried to connect directly to the bluetooth using the Arduino serial monitor on every Baud rate and I cannot get any feedback.

Any more info needed please ask.

All help much appreciated.

Thank you

bunnygirl80

Hi,

I have a Crius SE and also a BT adaptor. You have to connect the BT module to the TTL port and not the FTDI port. The standard 4 pin BT plug should attach directly to the TTL socket with black towards the outer edge. I can post a picture if it helps!

Once you have the BT connected to your MW, the red led of the BT module will flash until it is paired with your PC.

Now on your PC you have to bind by pairing. When you search on your PC it should find a Crius and you can choose to pair with a device with an existing code. I did mine on Windows 7. The pairing code is "0000".

Once this is done, if you go to Device Manager in Control Panel you can see which port the BT adaptor is using. This is normally under Bluetooth or Bluetooth devices. Now launch your WinGUI and choose the COM port you noted from Device manager and connect.

All should work.

Stef
Always smile because you never know who could be falling in love with it. :) Drone Operator in North Wales. www.aerialworx.co.uk


Gaza07

Hi Hibbo the rctimer blue tooth dongle comes pre configured to 115200 baud and just works,
but some of the other brands are set to 9600 baud and won';t work until you rewrite the configuration to the module, you do this by connecting with a terminal program some thing like AccessPort  ~~

hibbo

Hello.

I';ve tried so many terminal programs and tutorials and still no joy.  Think I';ll just send it back and stick with usb for now.

Cheers tho

Gaza07

Hi Hibbo ive sent you a little program I found that is just for setting up blue tooth dongles, give it a try before you give up  ~~

hibbo

Hello, I don';t appear to have received any messages, do you have a link.  I';m intrigued I';ve tried many different programs and none to any avail.

Gaza07

Hi Hibbo its about 5mb so prob didnt get through try this link click file and select download  ~~
https://docs.google.com/file/d/0B4Pi876X3IIgel84RDljYmdMUXM/edit

hibbo

Thanks for that.  This is what happened. 

Port opening success
Checking if module is present
sent AT received
Module not found!

That happened on every baud rate.  The red light on the module was solid, indicating it was connected.

Any clues?  I tried swapping tx/rx cables and restarted the program everytime. 

hibbo

Saturday,February 16, 2013, 11:58:01 #9 Last Edit: Saturday,February 16, 2013, 12:22:04 by hibbo
Right then, since loosing my FTDI breakout board I would really like to get my bluetooth module working.  I am thinking I will need to start from scratch.  I';ve searched and searched the internet and it always comes up with the same thing "plug in BT module, click connect, done".  Well this is not the case with mine and I would really appreciate some help, please and thank you.

It is a JY-MCU version 1.05

Is there a way to do it through Arduino?  I can connect the bluetooth module to the GUI and the light goes solid but when I try and read settings in the GUI I get nothing

Thank you