CN-06 gps unit to crius AIO v1.1

[paulcobra]

am i right in thinking this connects to the s1~s3 port? if so do i follow wiring colour for colour between the wiring that comes with the GPS and the wiring that comes with the crius FC ??
on the GPS i have red,yellow,green,black in that order on the crius plug i have black,red,blue,purple,yellow,green,orange,white.

[Gaza07]

Hi Paul not sure if the colours match on different models but they didnt on mine you need to connect the Gps to serial port 2 like below

Gps Rx to AIOP TX2
Gps Tx to AIOP Rx2
Gnd     to   Gnd
Vcc     to   Vcc

The board must be powered by the extended power and not a esc

[paulcobra]

cheers gaz the colours match on mine, are the other wires on the s1~s3 port ?

[Gaza07]

Hi Paul don';t take it for granted the colours are in the right place match the wires to to the drwaing below, download the image and zoom in you can then count the wires in the plug to see which is which 

[attach=1]

[paulcobra]

I double checked them with the print out on the back of my board and it matched.

[Gaza07]

Nice one its always best to double check as mine the colours didn';t match at all   

[paulcobra]

What are the other wires used for in that plug?

[Gaza07]

The other wires are the other serial ports 

Serial 1  Rx1 / Tx1
Serial 2  Rx2 / Tx2
Serial 3  Rx3 / Tx3

Quite logical when you know