Pages:
Actions
  • #151 by Trimitsos on 11 Nov 2016
  • flying over a field

  • #152 by Trimitsos on 12 Nov 2016
  • #153 by Trimitsos on 23 Nov 2016
  • Does anyone know, if there is a best suited Blheli version for little bees 20A opto?
    What is the version most people use? Is the latest version compatible?
    Should I upgrade firmware to latest or not?
  • #154 by Cheredanine on 23 Nov 2016
  • Just normal blheli, upload latest, should be fine,
    Blheli_s 16.4 or later
  • #155 by Trimitsos on 24 Nov 2016
  • I have heard a rumor that little bees opto work better with 14.3 than with 14.6 blheli version.
    Any background on this?
  • #156 by atomiclama on 24 Nov 2016
  • My LB20 are running fine on the latest BlHeli
  • #157 by Cheredanine on 24 Nov 2016
  • Last time I upgrade blheli was 14.4 I think, since then pretty much converted everything to blheli_s so possibly not the best to advise but generally the current release as a code base (because a lot of it is common between blheli and blheli_s) is very good, the previous release (in blheli_s 16.3) had a bit of an f';up that could brick the escs
  • #158 by Trimitsos on 24 Nov 2016
  • So I am leaving them on 14.8 and shall see what happens...
  • #159 by Cheredanine on 24 Nov 2016
  • For what it is worth I still have quads running last years escs and blheli versions, if it is stable and flies nicely/the way you want, the only reason to upgrade is a new feature you want
  • #160 by Trimitsos on 20 Dec 2016
  • Is there a reason why I can';t find the setting for "flight controller loop time"?

    Is it possible that version 1.14.1 has removed it from configuration tab?

    is there a way to change it in 1.14.1 ? or shall I return to 1.13???

    Help, anyone pleaseeeeee....  :frantic: :frantic: :help: :help:
  • #161 by Trimitsos on 05 Jan 2017
  • I have installed beta flight and now have the following problem.
    when armed and not in air mode, my motors still spin. :angry: :angry: :angry: :confused:

    Normally I have a two position switch for arming
    and a three position for Angle / horizon-air mode / air mode

    So when I want to land, I switch to angle (no air mode) and once I drop down the throttle my motors stop.

    Anyone that could help? :help:

     :banghead:Just found that I forgot to switch on Motor stop!! :banghead: :banghead: :rofl: :rofl:
  • #162 by Trimitsos on 23 Feb 2017
  • UPGRADED 4S... tweaker come back
    + RacerStar motors 2205 2300KV
    + RUNCAM OWL PLUS


  • #163 by Trimitsos on 30 Apr 2017
  • Some racing footage.... in Greece! 2017-04











    ... 7&index=16

    ... 7&index=14
  • #164 by ched999uk on 30 Apr 2017
  • Nice, what FC are you using and what is doing the On Screen Display?
    Cheers
    Happy Flying.
    Found it:

    ';I use 3cell batteries and pdb/osd I use is REDRotor OSD.
    F.C. is LumenierLux';

    Cheers
  • #165 by Trimitsos on 02 May 2017
  • Nice, what FC are you using and what is doing the On Screen Display?
    Cheers
    Happy Flying.
    Found it:

    ';I use 3cell batteries and pdb/osd I use is REDRotor OSD.
    F.C. is LumenierLux';

    Cheers

    PDB is indeed the RED rotor OSD.
    But since my previous posts,
    I have changed the FC with an X-Racer...
    and switched to 4S batteries!
  • #166 by Trimitsos on 02 May 2017
  • One more from today...
  • #167 by Trimitsos on 07 May 2017
  • #168 by Trimitsos on 08 May 2017
  • old oil factory in Greece, Athens
  • #169 by atomiclama on 09 May 2017
  • Nice place you have to fly there  ~~
  • #170 by Trimitsos on 10 May 2017
  • Nice place you have to fly there  ~~

    Well it was my first time there. I try to visit new places.
    you may see some places from Greece on my personal channel.
    Not something huge but I would say quite decent.
  • #171 by Trimitsos on 17 May 2017
  • A NEW FIND! First flights there
    and a bad crash in the end that cost one of my motors...

  • #172 by atomiclama on 17 May 2017
  • I think you will have some fun there, nice find  ~~
Pages:
Actions