• #1 by Eski on 09 Jan 2018
  • Starting to look at my first pair of FPV Googles for casual flying.. maybe a used FatShark V3 or Banggood are doing discount on Aomway Cmd.. Just looking at the suggestions for power supply? I could use one of my five 4s Lipos I have, 850 14.8V if that isn't too OTT? or has anyone had experience with the Fatshark 18650 cell unit?

    My flying time is limited.. I'm still new to the game.. a couple of hours I can get during the freezing weather..

    Still flying a vortex pro 150 - pending a fix to an ESC


  • #2 by Bad Raven on 09 Jan 2018
  • Check the power requirements for each specific unit, as some are max 2S voltage, some 3S, etc.
  • #3 by Eski on 09 Jan 2018
  • Aomway does give a ranged power range - Power Supply : DC7-18V(2S-4S)
  • #4 by Bajadre on 09 Jan 2018
  • always used the standard 1000mah 2cell with fatsharks good couple of hours of fpving think only once it ran out as I didn't recharge it  :slap:

    fatshark also do a 1800mah one and am sure hobbyking sell a 1500mah with the right connectors etc.

    found as long as you remember to shut them off when not flying or watching others through them you should get a full day even on the stock lipo  ~~